P0E4C
Hybrid/EV Battery Pack Voltage Sense F Circuit High
P0E4C means pack voltage measurement F reports a value above anything the battery can produce. Common reasons are a sense line in contact with a higher potential, a lost ground reference in the measuring circuit or a faulty analog input, so the channel rather than the cells is suspect. No manufacturer documents P0E4C publicly. In GM's 2019 hybrid tables the channel A code P0ABD sets above 479 V, again 1.6 s within 2 s and Type A. CARB requires battery voltage sensors to be checked against upper and lower limits. Real overvoltage of single cells is reported by cell voltage codes such as P0DE7, while the low fault of channel F is P0E4B and the same high fault on channel E is P0E47. The controller usually blocks or limits electric operation.
Possible causes
- Channel F sense line touching a higher potential high
- Lost ground reference or broken divider in the measuring circuit medium
- Faulty analog input or software of the battery controller low
Symptoms
- Warning lamp and limited electric drive
- Charging interrupted or not started
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E4C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.