OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E4B

Hybrid/EV Battery Pack Voltage Sense F Circuit Low

P0E4B sets when pack voltage measurement F falls below its plausible minimum, which normally points to a sense path shorted to ground, an open sense fuse or a defective input of the battery controller. No manufacturer documents P0E4B publicly. As a reference, the battery energy control module in GM's 2019 hybrid tables sets the channel A code P0ABC when pack-side voltage stays under 24 V for 1.6 s within a 2 s window, Type A, one trip, as long as system voltage is at least 9 V. CARB requires out-of-range checks of battery voltage sensors. P0E4C is the high counterpart, P0E4A the plausibility fault, and the matching low code of channel E is P0E46. Because precharge and contactor checks rely on the reading, the vehicle may not reach ready mode.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 4B

Possible causes

  • Channel F sense lead shorted to ground or pack housing high
  • Open fuse or resistor in the channel F sense path medium
  • Failed analog input of the battery controller low

Symptoms

  • No ready mode or contactors do not close
  • MIL and high-voltage warning on

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E4B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication