P0E4A
Hybrid/EV Battery Pack Voltage Sense F Circuit Range/Performance
P0E4A reports that pack voltage measurement F lies within its electrical range but disagrees with a reference value. No manufacturer documents P0E4A publicly. GM's 2019 hybrid tables show two plausibility checks such a channel could face: P0ABB fails when pack voltage and the summed cell voltages differ by more than 12 V in 20 of 25 samples at 25 ms, and P0AF8 compares the pack sensor with the inverter bus voltage, failing at more than 13.95 V difference in 400 of 500 samples, or at more than 14.95 V against the charger bus. Both are Type A, so the MIL comes on in the first trip. CARB requires rationality monitoring of battery voltage sensors. The electrical faults of channel F are P0E49, P0E4B and P0E4C; channel E uses P0E45.
Possible causes
- Contact resistance at a sense terminal distorting the channel F value high
- Fault in the comparison value, such as the inverter bus or cell voltage measurement medium
- Measuring drift or software issue in the battery controller low
Symptoms
- MIL on in the first trip with reduced battery power
- Implausible state of charge display
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E4A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.