P0E48
Hybrid/EV Battery Pack Voltage Sense E Circuit Intermittent/Erratic
P0E48 marks pack voltage measurement E as unsteady: the signal jumps, drops out for fractions of a second or changes faster than a battery voltage can, and then returns to normal. Because the fault comes and goes, it is often found only as a stored code after a brief warning. No manufacturer documents P0E48 publicly, and GM's published hybrid tables, for example those of the 2013 two-mode trucks, test pack voltage only for low, high and rationality faults on channel A. CARB requires circuit monitoring of battery voltage sensors in the energy storage system. Steady faults of the same channel are P0E44 to P0E47; channel F uses P0E4D for this fault type. Loose or corroded sense terminals and chafed leads that react to vibration or heat are the usual suspects.
Possible causes
- Loose, pushed-back or corroded terminal on the channel E sense lead high
- Chafed sense lead that shorts briefly under vibration medium
- Intermittent fault in the battery controller input low
Symptoms
- Warning light that comes and goes
- Brief losses of electric power, often on rough roads
- Stored code without a current fault
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E48
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.