P0E47
Hybrid/EV Battery Pack Voltage Sense E Circuit High
P0E47 means pack voltage measurement E reports more voltage than the pack can reach even when fully charged. A sense lead touching a higher potential, a broken divider resistor or a damaged input of the measuring chip are the usual explanations; real overcharging is unlikely when only one channel shows it. P0E47 is not documented by any manufacturer in public. The 2013 GM two-mode hybrid pickups and SUVs test the analogous channel A against 430 V (P0ABD), using the same 300-of-400 counter at 10 ms and running the test only while the 12 V network sits between 9 and 18 V. CARB requires battery voltage sensors to be tested against plausible limits. Low and plausibility faults of channel E are P0E46 and P0E45. Expect a warning and restricted electric drive.
Possible causes
- Sense lead of channel E chafed through and touching a higher potential high
- Broken divider resistor or lost reference in the measuring circuit medium
- Damaged measuring input or software fault in the battery controller low
Symptoms
- MIL and hybrid warning on
- Charging or regenerative braking restricted
- Electric drive limited or blocked
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E47
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.