P0E46
Hybrid/EV Battery Pack Voltage Sense E Circuit Low
P0E46 is stored when pack voltage measurement E reads below the lowest value the connected battery could physically present. That points to the measuring path, such as a sense lead shorted to ground, a blown sense fuse or a failed input stage, not to an empty battery. No manufacturer documents P0E46 publicly. On GM's 2013 two-mode hybrid trucks the comparable channel A code P0ABC sets below 40 V, but only after the contactors have been closed for more than 200 ms, and needs 300 failures in 400 samples at 10 ms, Type A, one trip. CARB requires out-of-range checks for battery voltage sensors. The high counterpart is P0E47; a pack that is really deeply discharged sets its own codes such as P0AFA. Hybrid operation may be blocked.
Possible causes
- Sense lead of channel E shorted to ground or chassis high
- Blown fuse or open resistor in the sense path pulling the reading down medium
- Defective input stage of the battery controller low
Symptoms
- Vehicle does not become ready to drive or drops out of ready mode
- Hybrid system warning and MIL lit
- Electric drive or engine assist unavailable
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E46
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.