OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E45

Hybrid/EV Battery Pack Voltage Sense E Circuit Range/Performance

P0E45 says pack voltage measurement E delivers a value that is electrically valid but does not fit the rest of the battery data. Such a rationality test usually compares the channel with the summed block or cell voltages, or with a second pack measurement. No manufacturer documents P0E45 publicly. GM's 2013 two-mode hybrid trucks (Tahoe, Yukon, Escalade, Silverado, Sierra) show the method on channel A: their battery pack control module fails P0ABB once the gap between pack voltage and the added-up block voltages exceeds 50 V in 70 of 80 checks taken every 100 ms, Type A, one trip. CARB requires plausibility monitoring for battery voltage sensors. Circuit, low, high and erratic faults of channel E are P0E44, P0E46, P0E47 and P0E48. Battery power is usually limited.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 45

Possible causes

  • Corroded or loose sense connection adding resistance and skewing the reading high
  • Drifting measuring stage or outdated software in the battery controller medium
  • Fault in the reference value, e.g. a block or cell voltage channel low

Symptoms

  • Warning light with reduced hybrid or electric power
  • Displayed state of charge or range jumps unexpectedly

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E45

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication