P0E44
Hybrid/EV Battery Pack Voltage Sense E Circuit
P0E44 is the basic circuit code for the fifth pack voltage measurement, channel E, which follows channels A to D (P0ABA, P0B14, P0B19, P0B1E) in the code list. The battery controller stores it when this input is electrically unusable, for example open, without a plausible raw value or failing a self-test of its measuring stage, and none of the more specific low, high or erratic codes fits. No manufacturer documents P0E44 publicly, and which tap a maker labels E is its own decision. CARB requires every voltage sensor of the hybrid energy storage system to be monitored as an input component, with codes narrowing the fault down to a replaceable part. Without this value the controller restricts or blocks high-voltage operation.
Possible causes
- Open or unplugged voltage sense lead or connector inside the pack high
- Faulty measuring stage or input of the battery controller medium
- Blown fuse or open resistor in the sense path low
Symptoms
- Hybrid or high-voltage system warning lit
- Reduced electric assist or limited battery power
- Vehicle may not switch to ready mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E44
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.