OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E43

Hybrid/EV Powertrain Control Module B

P0E43 is the module-B counterpart of P0A1D: it reports that a second hybrid/EV powertrain controller has detected an internal failure or can no longer be trusted. Vehicles with two such processors, for example GM's Bolt EV with a second powertrain module labelled K114B (HPCM2), are where the letter B makes sense. No manufacturer documents P0E43 publicly. The A code shows what is meant: GM's 2013 hybrid tables store P0A1D when a status message from motor control processor A reports a controller failure in 3 of 4 counts, Type B, and Ford's 2019 hybrid summary uses P0A1D when the serial link between its processors fails, checked continuously. CARB requires the MIL for computer faults that impair OBD. Reprogramming or module replacement is likely; power may be limited.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 43

Possible causes

  • Internal processor or memory fault in module B high
  • Software fault curable by reprogramming medium
  • Supply, ground or internal bus fault at the module low

Symptoms

  • MIL and hybrid or EV system warning
  • Reduced propulsion power or no ready mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E43

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication