P0E40
Charge Status Indicator A Control Circuit High
P0E40 is logged when the drive circuit of charge status indicator A carries voltage although the light is commanded off, typically because the line touches a live wire. P0E40 has no public documentation from any manufacturer. In GM's 2012 Volt tables (12OBDG01A) this is the second case inside P0D2C: with the LED switched off, the hybrid controller looks for a short to battery and needs 40 bad samples out of 50 at 100 ms. A light that glows while nothing is charging, or keeps glowing after charging has ended, is the visible result and can mislead the owner about the charge state. Suspects are wiring near the dash or charge port, water in a connector or a driver stage that no longer switches off. P0E3F is the low case on the same light.
Possible causes
- Indicator wire shorted to a battery-fed circuit high
- Output driver no longer switching off medium
- Moisture bridging pins in the indicator connector low
Symptoms
- Charge status light on although nothing is charging
- Owner misled about the actual charge state
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0E40
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.