P0E3E
Control Pilot Indicator Control Circuit High
P0E3E is the high-side counterpart for the control pilot indicator circuit: the module senses voltage on the LED line when there should be little or none, the classic sign of a short to a supply wire. Publicly, no manufacturer documents P0E3E. On the Chevrolet Volt, GM's 2011 and 2012 tables still handle this under P0D2B, as a second case checked while the LED is commanded off, where 40 of 50 readings, one per 100 ms, have to fail. Shorts to voltage tend to come from chafed wiring at the charge port, where several feeds run side by side, or from a failed driver stage. The LED may glow permanently or flicker regardless of the real pilot state. P0E3D is the low case, P0D2B the open circuit; charging is normally not blocked.
Possible causes
- Indicator wire chafed against a supply wire near the charge port high
- Output stage in the module stuck on medium
- Water in the charge port connector bridging pins low
Symptoms
- Pilot indicator lit or flickering without reason
- Misleading charge port light while charging works
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0E3E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.