P0E3D
Control Pilot Indicator Control Circuit Low
P0E3D concerns the lamp or LED that shows the state of the pilot connection to the charging station, not the pilot signal itself. Low means the driver circuit reads too little voltage, typically because the line to the LED is shorted to ground. No manufacturer documents P0E3D publicly. GM's Volt tables for 2011 and 2012 (11OBDG01, 12OBDG01A) fold this case into the older open-circuit code P0D2B: a ground short is detected while the LED is commanded on, with 12 failed samples out of 15 at one sample every 100 ms, Type B. The current code set gives the ground short its own code, while P0E3E takes the short to voltage. The indicator stays dark or wrong, charging normally continues. Pilot line faults are P0CF3 and P0CF4.
Possible causes
- Wire to the indicator LED shorted to ground at the charge port high
- Shorted LED or indicator unit medium
- Faulty output driver in the controlling module low
Symptoms
- Pilot indicator stays dark when it should light
- Charging itself usually unaffected
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0E3D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.