P0E3A
DC/DC Converter Voltage Sensor B Intermittent/Erratic
P0E3A covers an unsteady signal from voltage sensor B of a DC/DC converter: short spikes, dropouts or noise that never last long enough for the hard low or high codes. Publicly, no manufacturer documents P0E3A. For orientation, GM's 2025 engine tables (25OBDG03A) accept 1 to 28 V on raw voltage value 2 and only set P0E38 or P0E39 after roughly four seconds out of five of continuous failure, so brief disturbances slip past those tests. FCA calls this channel voltage sensor 2 on the Ram 1500 eTorque. CARB wants inputs checked for circuit, range and rationality faults; an erratic code is the gap filler. A fault confined to sensor B while sensor A is steady narrows the search to the B wiring and its terminals, often in a spot that moves with the engine.
Possible causes
- Harness rubbing intermittently where it moves with the engine high
- Poor terminal tension in the sensor B circuit medium
- Electrical interference on an unshielded sense line low
Symptoms
- Sporadic warning light, sometimes cleared on its own
- Start-stop unavailable from time to time
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0E3A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.