P0E38
DC/DC Converter Voltage Sensor B Low
P0E38 is stored when the second voltage reading of the DC/DC converter, sensor B, sits at the bottom of its scale. GM uses it in the 2025 engine tables (25OBDG03A) with the same limits as on sensor A, only applied to raw voltage value 2: under 1 V, confirmed by 320 of 400 samples taken at 12.5 ms intervals and only checked at 6.6 V battery voltage or more. GM's description calls it a test for short to ground, and the result is Type B with the MIL on the second trip. Because GM uses two independent paths, a fault on just one of them points to that path's wiring or circuit rather than the converter output itself. Sensor A's low code is P0E33; P0E39 covers sensor B reading too high.
Possible causes
- Sensor B signal wire shorted to ground high
- Failed second measuring circuit in the converter medium
- Bent or corroded pin in the converter connector low
Symptoms
- MIL on after two trips (GM)
- Auto stop/start inhibited
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0E38
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.