P0E37
DC/DC Converter Voltage Sensor B Range/Performance
P0E37 says that voltage sensor B delivers a believable number which nevertheless disagrees with what the vehicle measures elsewhere. GM's 2025 engine tables (25OBDG03A) check raw voltage value 2 of the converter against the ECM run/crank voltage: in bypass mode a gap above 2 V counts, and 320 failed samples out of 400 at 12.5 ms set a Type B code. During an automatic engine restart the converter stabilises the 12 V supply, and then 8 of 16 samples are enough. FCA, which calls this channel voltage sensor 2, changed the code from a two-trip to a one-trip code with flash 08-037-21 for the 2021 Ram 1500 eTorque. Drift in the measurement, voltage drop on wiring or outdated software are typical; hard shorts are P0E38 and P0E39.
Possible causes
- Second voltage measurement in the converter drifting high
- Voltage drop on supply or ground wiring distorting the comparison medium
- Controller software needing an update (FCA eTorque) medium
Symptoms
- MIL on, after one or two trips depending on maker and software
- Start-stop unavailable
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0E37
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.