OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E35

DC/DC Converter Voltage Sensor A Intermittent/Erratic

P0E35 is reserved for a voltage sensor A signal that jumps or drops out briefly instead of staying wrong: the reading is erratic, but not low or high long enough for P0E33 or P0E34 to mature. No manufacturer documents P0E35 publicly. The neighbouring GM codes for the same sensor (25OBDG03A, a converter backing up the 12 V network during engine auto-starts) show the frame: valid readings lie between 1 V and 28 V and are sampled every 12.5 ms. CARB expects input faults to be split into circuit, out-of-range and, where feasible, rationality checks; an erratic code captures the unstable signal in between. Loose terminals, a cracked solder joint or a ground that only fails under vibration are the usual suspects, so the fault may come and go.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 35

Possible causes

  • Loose or spread terminal in the converter connector high
  • Ground connection that fails under vibration medium
  • Cracked solder joint in the converter's measuring circuit low

Symptoms

  • Warning light that appears and disappears
  • Start-stop works only now and then

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0E35

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication