P0E32
DC/DC Converter Voltage Sensor A Range/Performance
P0E32 flags a voltage reading of DC/DC converter sensor A that is electrically valid but does not match a reference. GM's 2025 engine tables (25OBDG03A, ECM) apply it to a converter that holds the 12 V supply steady during auto-starts: in bypass mode the raw output voltage may differ from the ECM run/crank voltage by no more than 2 V, and Type B (two trips) follows once 320 of 400 samples, taken every 12.5 ms, fail. During an auto-crank 8 of 16 samples with at least 6.6 V battery voltage count, as do more than 2 failed auto-cranks out of 3. FCA's flash 08-037-21 for the 2021 Ram 1500 eTorque turns P0E32-00 into a one-trip code. Mercedes ties P0E32FA in the HV converter of S-Class hybrids to sporadic red 12 V messages.
Possible causes
- Voltage measurement in the converter drifting high
- Voltage drop on supply, ground or reference wiring medium
- Control software needing an update (FCA, Mercedes) medium
- Weak 12 V battery distorting the comparison during cranking low
Symptoms
- MIL on after two trips (GM)
- Red 12 V warning message (Mercedes)
- Auto stop/start unavailable
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0E32
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.