OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E31

DC/DC Converter Voltage Sensor A Circuit

P0E31 is the general circuit code of voltage sensor A in a DC/DC converter, the measurement the converter or its controller uses to regulate output voltage. It is used for electrical faults that do not fit the low, high or erratic categories. P0E31 itself is not documented publicly by any manufacturer. GM's 2025 engine tables use the neighbouring codes for the same sensor in a converter that steadies the 12 V supply during engine auto-starts: P0E33 below 1 V, P0E34 above 28 V, P0E32 for implausible values. FCA names sensor A as voltage sensor 1 on the 2021 Ram 1500 eTorque. CARB wants open circuits and out-of-range signals of such inputs reported separately where feasible. With a lost voltage signal the converter tends to stop or run in a fallback mode.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 31

Possible causes

  • Voltage measurement inside the DC/DC converter failed high
  • Wiring or connector fault on the converter medium
  • Poor ground connection of the converter low

Symptoms

  • Warning light and possibly 12 V battery warning
  • Engine auto-stop disabled or reduced 12 V supply

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0E31

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication