P0E30
High Voltage Fuse C
P0E30 is the code for a third fuse in the high-voltage system, after A (P0A95) and B (P0E2F). No manufacturer documents P0E30 publicly. How such a fuse is checked can be seen from the siblings: Volvo and Polestar have the battery control module compare the voltage measured after each fuse output with the pack voltage, and Porsche numbers its Taycan fuses as fuse and fuse 2 under P0A95 and P0E2F. A pack with only two fused branches never sets P0E30. What the third fuse protects, for example a heater, compressor or charger branch, is decided by the maker. If it opens, the consumers on that branch lose power; a blown fuse normally follows a short circuit that has to be found before the fuse or the battery unit is replaced.
Possible causes
- Short circuit in a consumer on the third fused branch high
- Faulty voltage measurement behind the fuse medium
- Software error in the battery control module low
Symptoms
- HV system warning message
- Consumers on the affected branch without function
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E30
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.