OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E2F

High Voltage Fuse B

P0E2F says the battery management has found a second high-voltage fuse open, or believes it has. Several makers use it. Mercedes calls it electrical fuse B, the battery-internal fuse protecting auxiliary HV consumers in its plug-in hybrids: a shorted belt starter-alternator or another short in that line blows it, the engine no longer starts and only electric driving remains; once the short is fixed, the 2024 bulletin for series 206, 223, 254 and 290 has the HV battery replaced. On EQB models a DC/DC wake-up fault can set it without a blown fuse. Porsche lists it as fuse 2 on the 2020-22 Taycan, which is then not ready to drive. Volvo and Polestar compare the voltages after the front and rear fuse outputs with pack voltage. Main fuse: P0A95.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 2F

Possible causes

  • Short circuit in an HV consumer on the protected branch high
  • False detection by the battery management or DC/DC wake-up fault medium
  • Faulty voltage measurement behind the fuse low

Symptoms

  • Engine does not start, electric driving only (plug-in hybrids)
  • Vehicle not ready to drive or propulsion warning
  • MIL or HV drive system warning on

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E2F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication