P0E2D
Internal Control Module Hybrid/EV Battery Monitor Performance
P0E2D is an internal self-test result of the module that supervises the high-voltage pack: the part that measures cell voltages, usually a dedicated monitor chip with its own converter and reference, does not behave as expected. It casts doubt on the measurement itself, not on a cell. Battery monitor patents such as Renesas US9735567B2 show the kind of checks involved, for example self-diagnosis of the A/D converter, detection of a broken sense line between cell and chip, or a second, simpler fault monitor. No manufacturer document on an official server explains P0E2D. CARB requires computers and hybrid components feeding the drive to be monitored. Without trusted cell voltages the pack cannot be shielded from over- or undercharge, so power is limited or the car will not get ready.
Possible causes
- Cell monitoring circuit in the battery control module faulty high
- Software error in the battery control module medium
- Interrupted cell voltage sense line low
Symptoms
- Hybrid or EV system warning and MIL on
- Reduced power or vehicle not ready to drive
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E2D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.