P0E2C
Drive Motor Inverter Temperature Sensor H Circuit Intermittent/Erratic
P0E2C covers an unsteady signal from inverter temperature sensor H: it flickers, jumps or drops out for moments and then recovers. That pattern differs from P0E2A and P0E2B, where the voltage stays beyond a limit. No manufacturer documents P0E2C publicly. Mitsubishi watches its sensor 8 on the 2023 Outlander PHEV only for plausibility and the two voltage limits and gives no erratic code for it. CARB's monitoring rules for hybrid input components include such intermittent faults. In practice the trigger tends to be mechanical, such as vibration at a connector, a fine crack in the sensing board or a terminal with corrosion. Freeze frame data and wiggle tests help, since the fault may be gone when the car arrives.
Possible causes
- Connector contact affected by vibration high
- Corroded terminal in the sensor circuit medium
- Hairline crack in the sensing board low
Symptoms
- Intermittent warning light
- Occasional short power reductions
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E2C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.