P0E2B
Drive Motor Inverter Temperature Sensor H Circuit High
P0E2B is the upper-limit fault of inverter temperature sensor H. Mitsubishi documents it for the 2023 Outlander PHEV, where sensor H is IGBT sensor 8 at the V-phase H2 position of the front motor unit: a signal reaching 3.75 V for 0.08 s while the unit receives 8 V or more sets P0E2B-00, and the function list shows MIL and hybrid warning light for it. In an NTC circuit with pull-up, as GM uses in its inverters, the controller would read this as an implausibly cold phase, so the cause is almost always electrical: an interrupted signal path, a missing sensor ground or an element that has gone open. Its low-side partner is P0E2A, the U-phase counterpart P0E26. The repair at Mitsubishi is a new power drive unit.
Possible causes
- Interrupted signal path of sensor H high
- Missing sensor ground medium
- Thermistor element gone open low
Symptoms
- MIL and hybrid warning light on
- Drive power may be limited
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E2B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.