P0E29
Drive Motor Inverter Temperature Sensor H Circuit Range/Performance
With P0E29 the controller doubts the reading of inverter temperature sensor H although its voltage is valid. On the 2023 Outlander PHEV Mitsubishi uses it for IGBT sensor 8 of the front motor unit, the V-phase H2 position. The cold-start comparison is the same one used for sensors 1 to 7: soak of 600 s or more, IGBTs off, supply at least 8 V, test window of 1.5 s; a difference above 47 °C to either of two reference IGBT temperatures, held for 0.1 s, stores P0E29-00 and lights the MIL and the hybrid warning light. A sensor that is wrong by that much after a cold soak is offset, not overheated. The sibling for the U-phase sensor is P0E24. Mitsubishi verifies it on a test drive before installing a new power drive unit.
Possible causes
- Sensor H offset against the other IGBT sensors high
- Measuring circuit in the power drive unit faulty medium
- Uneven cooling of the inverter low
Symptoms
- MIL and hybrid warning light on
- Driving usually unaffected
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E29
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.