P0E28
Drive Motor Inverter Temperature Sensor H Circuit
Sensor H is the eighth temperature sensor of a drive motor inverter, and P0E28 is its general circuit code for an electrical fault without a more precise low, high or erratic finding. No manufacturer documents P0E28 publicly. Mitsubishi, whose 2023 Outlander PHEV is the documented user of the H series, calls the part FMCU IGBT temperature sensor 8 (V-phase H2) and files its faults under P0E29, P0E2A and P0E2B; the general circuit code is not listed. Which component carries letter H is up to each maker. CARB requires hybrid input components to be checked for interruptions and for readings outside their range. When the value is missing, the controller has to protect that phase by limiting torque; the sensor is part of the inverter assembly.
Possible causes
- Sensor H or its sensing board in the inverter failed high
- Connector or internal wiring fault in the inverter medium
- Evaluation input of the motor control unit faulty low
Symptoms
- Hybrid warning light and MIL on
- Limited motor torque
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E28
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.