OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E27

Drive Motor Inverter Temperature Sensor G Circuit Intermittent/Erratic

P0E27 marks short dropouts or jumps in the signal of inverter temperature sensor G. Between the events the reading is normal again, which is what separates it from the steady faults P0E25 and P0E26. No manufacturer documents P0E27 publicly; Mitsubishi, the one documented user of sensor G on the 2023 Outlander PHEV, checks that sensor for plausibility and for both voltage limits only. CARB expects hybrid sensor circuits to be monitored for circuit faults, which covers unstable signals as well. Likely sources are a connector with poor contact, a cracked solder joint on the sensing board or a thermistor with unstable resistance. The code can vanish before the workshop sees it, and the drive may be limited while it is active.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 27

Possible causes

  • Intermittent contact at an inverter connector high
  • Cracked solder joint on the sensing board medium
  • Thermistor with unstable resistance low

Symptoms

  • Warning light that comes and goes
  • Brief drops in electric drive power

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E27

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication