P0E26
Drive Motor Inverter Temperature Sensor G Circuit High
P0E26 is logged when the signal of inverter temperature sensor G climbs above its permitted range. In the 2023 Outlander PHEV it belongs to the front motor unit's U-phase H2 sensor: at least 3.75 V lasting 0.08 s, with at least 8 V supply to the unit, sets P0E26-00 together with MIL and hybrid warning light. With an NTC element and pull-up resistor, the layout GM documents for its inverter thermistors, such a voltage would mean an extremely cold power switch, which a working inverter never shows; the usual reasons are an open sensing line, a lost reference ground or a broken thermistor. The low-side fault is P0E25. Because the sensor is built into the unit, Mitsubishi replaces the power drive unit.
Possible causes
- Open sensing line or broken thermistor high
- Lost sensor reference ground medium
- Signal shorted to the sensor supply low
Symptoms
- MIL and hybrid warning light on
- Reduced electric drive power as a precaution
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E26
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.