OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E21

Hybrid/EV Battery Pack Coolant Control Valve B Control Circuit Driver Current/Temperature Too High

P0E21 is the overload or overheat report of the driver for coolant control valve B. No manufacturer documents P0E21 publicly. What B means differs between makers: on the 2011 Chevrolet Volt, GM's own codes for valve B (P1EC7, P1EC8) actually watch the second drive line of the same valve motor that serves as valve A, whereas other layouts have a physically separate second valve for a chiller or radiator branch. For diagnosis it is therefore worth checking first which actuator the maker calls B. The protection itself works like that of TI's integrated high-side switches for cars, which cut off at their current limit or near 150 °C and report it. CARB obliges makers to monitor these outputs electrically. Electrical circuit faults of valve B are P0D1A, P0D1D and P0D1E.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 21

Possible causes

  • Valve B binding so its actuator stalls against the stop high
  • Short or low resistance in the valve B actuator or harness medium
  • Degraded driver stage in the control module low

Symptoms

  • Check engine light on
  • Coolant routing does not change as commanded
  • Battery temperature drifts, power or charging limited

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0E21

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication