P0E1A
Hybrid/EV Battery Pack Coolant Pump B Control Circuit/Open
P0E1A reports an open or otherwise faulty command circuit for battery coolant pump B, a second electric pump found where the battery loop is split or a separate circuit feeds a chiller or heater. No manufacturer documents P0E1A publicly. For pump A, GM's 2019 tables show how the controller judges such a line by current: while running, below 200 mA or above 3 A is a fault, while off, below 120 µA; failing for 4 s within a 5 s window gives a Type B code. A second pump would usually be monitored the same way. CARB requires every electronic output of battery thermal management to be checked for circuit faults. Usually a wire has parted, a connector has backed out or the pump itself is dead. The low and high cases are P0E1B and P0E1C; supply and speed faults of pump B have their own codes, P2CF4 to P2CF7.
Possible causes
- Broken wire in the pump B command circuit high
- Loose or corroded connector at pump B high
- Failed electronics inside pump B medium
- Failed pump output in the controlling module low
Symptoms
- Check engine light on
- Battery or electronics temperatures rise faster under load
- Reduced power or charging rate
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0E1A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.