OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E19

Hybrid/EV Battery Pack Coolant Heater B Control Performance

P0E19 means heater B is commanded and electrically intact but the expected warming does not follow. No manufacturer documents P0E19 publicly. How such a test works is visible in GM's 2016 Volt, where the battery heater performance code P1EC6 runs once per drive or charge: during an active heat request the pack inlet coolant must gain more than 3 °C within 154.1 s, otherwise a Type B fault is stored; it is skipped while coolant level or inlet temperature sensor codes are active. CARB asks for such a functional check of heating where feasible. Air in the loop, a weak pump, a blocked hose or a failing element are the usual causes, and a wrongly routed valve can send the heat elsewhere. Unlike P0E15 for heater A, this concerns the second heater. P0E16 to P0E18 are its circuit codes.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 19

Possible causes

  • Air pocket or low coolant level in the battery loop high
  • Heater B element producing too little heat medium
  • Weak pump, restricted hose or coolant valve in the wrong position medium
  • Inlet coolant temperature sensor reading wrongly low

Symptoms

  • Check engine light on
  • Battery stays cold for a long time after a cold start
  • Reduced charging and drive power in winter

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0E19

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication