P0E18
Hybrid/EV Battery Pack Coolant Heater B Control Circuit High
P0E18 says the command line of battery coolant heater B reads high when the controller expects it low, for example from contact with a supply wire or an interrupted pulled-up input. No manufacturer documents P0E18 publicly. The risk here is a heater that cannot be switched off. Many coolant heaters therefore carry their own guard; one patent design with a thermistor in the heater housing stops current when the coolant temperature climbs faster than a limit. GM's 2016 Volt groups voltage shorts of its battery heater command into P1EC3 (Type B). CARB requires circuit monitoring of energy-store heating outputs and, where possible, a functional check of heating. A pinched wire against a live feed or a driver that sticks on is typical. Short to ground is P0E17, open circuit P0E16.
Possible causes
- Heater B command wire shorted to a voltage source high
- Controller driver stuck on medium
- Interrupted pulled-up input at heater B low
Symptoms
- Check engine light on
- Heater B switched off by its overheat protection
- Battery heating unavailable in cold weather
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0E18
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.