P0E15
Hybrid/EV Battery Pack Coolant Heater A Control Performance
P0E15 means heater A can be addressed electrically but does not deliver the heat it was asked for. Stellantis uses the code on Chrysler Pacifica plug-in hybrids from 2017 onward and the 2021–2023 Jeep Wrangler 4xe for the high-voltage electric coolant heater (ECH), a LIN-controlled unit that on these models heats the cabin loop. The ECH locks itself after low or high voltage, lost communication or overheating; repeated overheating locks it until service or, on the Wrangler after the third event, for good, and P0E15 must be present for the reset routine. Causes named are coolant leaks, air, frozen or wrong coolant, a faulty auxiliary pump, supply problems or the heater itself. Several bulletins (08-052-22, 08-080-26) cure false or permanent P0E15 entries with HCP/AHCP software. The MIL comes on and EV mode may be lost.
Possible causes
- Low coolant, leaks or trapped air in the heater loop high
- Hybrid control software that needs an update (Stellantis HCP/AHCP) high
- Heater unit permanently locked or internally failed medium
- Faulty auxiliary coolant pump or restricted hoses medium
- High- or low-voltage supply fault or LIN bus problem at the heater low
Symptoms
- Check engine light on
- Message that electric mode is unavailable, engine keeps running
- Little or no heat from the electric heater
- Permanent code may block an emissions inspection
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0E15
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.