P0E11
Generator Inverter Power Supply A Circuit High
P0E11 is stored when supply A of the generator inverter is above its permitted range. Overvoltage on the gate driver feed can overstress the control inputs of the power transistors, so controllers usually react by blocking the inverter. No manufacturer documents P0E11 publicly. Ford's hybrid summary shows that such supplies are watched: a gate drive power supply above 15.08 V counts as a fault there, though Ford files it under a rotor position circuit voltage check and not under P0E11. CARB asks for circuit fault detection on hybrid parts. A short between two supply rails or a faulty regulator inside the inverter are the likely causes; a charging system fault on the 12 V side can also contribute. Siblings: P0E0F and P0E10; supply B high: P2CC7.
Possible causes
- Voltage regulator of the gate driver supply in the inverter faulty medium
- Short between two internal supply rails medium
- Overvoltage in the 12 V system (DC/DC converter or charging fault) low
Symptoms
- Hybrid system warning light and MIL on
- Generator blocked, no charging while driving
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E11
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.