OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E0E

Generator Phase U-V-W Circuit High

P0E0E reports a generator phase line that reads high: one of the U, V or W connections is held near the positive high-voltage potential, typically by an upper power switch that stays on or by a short to the positive rail. No manufacturer documents P0E0E publicly; the generator units Mitsubishi describes for the Outlander PHEV only use P0E0C here, and in GM's tables only the open-phase check P0C05 is used for the corresponding drive motor group. CARB still requires circuit faults of hybrid components to be detected. Because a phase stuck high lets current flow without control, inverters normally shut the gate drive off at once; the generator then stops supplying charge and the vehicle runs with restricted hybrid function. Low and open counterparts: P0E0D, P0E0C.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 0E

Possible causes

  • Upper IGBT of one phase shorted or not switching off medium
  • Phase line shorted to the positive high-voltage rail medium
  • Phase monitoring in the inverter faulty low

Symptoms

  • Hybrid system warning light and MIL on
  • Generator shut down, no charging while driving

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E0E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication