P0E08
Generator Phase W Current Sensor Circuit
P0E08 covers an electrical fault of the generator inverter's W-phase current sensor that falls outside the offset, low and high categories. No manufacturer documents P0E08 publicly. Unlike phase V, the W-phase sensor exists on both Outlander PHEV generations Mitsubishi describes: the 2018 model uses it as current sensor 2, the 2023 model as one of three, yet both log its faults only as P0E09, P0E0A and P0E0B. CARB demands circuit monitoring of hybrid components relevant to emissions. A sensor that delivers no usable value at all keeps the inverter from controlling generator torque, so the system will typically cut generator power and rely more on the engine or the battery. Phase U counterpart: P0E00, phase V: P0E04.
Possible causes
- Electrical fault in the W-phase sensor circuit inside the inverter medium
- Loose or corroded connector at the power drive unit medium
- Generator control unit faulty low
Symptoms
- Hybrid or engine warning light on
- Reduced generator output, battery charged less while driving
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0E08
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.