OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E04

Generator Phase V Current Sensor Circuit

P0E04 is the general circuit code for the generator inverter's V-phase current sensor, meant for an electrical fault that is not narrowed down to offset, low or high. No manufacturer documents P0E04 publicly. Phase V is a special case: the 2018 Outlander PHEV measures generator current with only two sensors, on phases U and W (P0E01 to P0E03, P0E09 to P0E0B), since the third current follows arithmetically from the other two. Only the 2023 model adds its own V-phase sensor, and there its faults are reported solely through P0E05 to P0E07. CARB requires electrical monitoring of hybrid components that affect emissions. If the code does appear, check the inverter connectors and look for further phase sensor codes. Matching codes for phases U and W: P0E00 and P0E08.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 04

Possible causes

  • Electrical fault in the V-phase sensor circuit inside the inverter medium
  • Poor contact at the inverter or generator control unit connector medium
  • Generator control unit faulty low

Symptoms

  • Hybrid or engine warning light on
  • Reduced generator output

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E04

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication