OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0E03

Generator Phase U Current Sensor Circuit High

P0E03 is the upper-limit fault of the current sensor that measures phase U of the generator inverter: its signal is pinned near the supply rail. In the 2023 Outlander PHEV, Mitsubishi lets the generator control unit set P0E03-00 when the U-phase voltage climbs to at least 4.5 V and remains there for 0.2 s with the unit supplied by at least 8 V; for the 2018 model the code list blames a short to the supply or a shorted current sensor 1. A reading this high would mean a phase current far beyond anything the generator delivers, so the controller treats it as an electrical defect and not as overcurrent; genuine overcurrent has codes of its own, at Ford for instance P0A71. On the 2023 model the MIL is switched on as well. Low signal: P0E02, zero-point fault: P0E01.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberE / 03

Possible causes

  • Sensor signal shorted to its supply voltage high
  • Current sensor in the power drive unit failed with high output medium
  • Lost sensor ground or reference inside the inverter low

Symptoms

  • MIL and hybrid system warning light on
  • Generator switched off or strongly limited
  • Engine runs more often without charging the battery

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0E03

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication