OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0DF1

Generator Inverter Temperature Sensor B Circuit Intermittent/Erratic

P0DF1 means the signal of generator inverter temperature sensor B drops out or jumps for short moments and then looks normal again. Typical triggers are temperature steps faster than the power module could physically heat or cool, or brief readings that resemble an open line. No manufacturer documents P0DF1 publicly: Ford's monitors for its generator inverter sensor cover only opens and shorts (P0BCE, P0BCF), and Mitsubishi has no intermittent code for the corresponding V-phase sensor at all. CARB still expects inverter thermal inputs to be monitored. Because the fault comes and goes, freeze frame data and a wiggle test of the inverter harness tell more than swapping parts. A steady fault on this sensor would be logged as P0DF0, P0DF5 or P0DF6 instead.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / F1

Possible causes

  • Loose or fretted terminal in the inverter connector high
  • Harness chafing or vibration damage near the power unit medium
  • Intermittent contact inside the inverter module low

Symptoms

  • Warning light that comes and goes
  • Occasional short loss of generator power
  • Fault often not reproducible at the workshop

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0DF1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication