P0DEF
Pedestrian Alert Control Module Circuit High
P0DEF reports a voltage above the permitted window on the wired link to the pedestrian alert control module, most often because a wire touches a supply line or the line has lost its ground reference. No manufacturer documents P0DEF publicly. The consequence differs from the low case: a line stuck high may leave the module permanently woken or commanded, so instead of silence the alert can behave oddly, for example sounding when it should not or draining the 12 V battery while parked. Whether that happens depends on the design. The legal background is the same as for the siblings: FMVSS 141 and the EU require a warning sound for quiet vehicles at low speed. Ford names the unit PACM. P0DED is an open circuit, P0DEE a short to ground, U013F lost communication.
Possible causes
- Wire pinched against a 12 V supply line high
- Loose or corroded ground connection of the module medium
- Internal fault of the alert module or its driver low
Symptoms
- Pedestrian sound missing or sounding at the wrong time
- Warning message in the instrument cluster
- Possible 12 V battery drain while parked
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0DEF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.