P0DED
Pedestrian Alert Control Module Circuit/Open
P0DED points to an open or faulty hard-wired circuit between the powertrain side and the pedestrian alert control module, the unit that makes a quiet hybrid or EV audible at low speed. It is not a network fault, which is U013F, nor a speaker fault, which uses B0122 and B0123. No manufacturer documents P0DED publicly. The module exists because of law: US standard FMVSS 141 requires a sound whenever propulsion is active and the car is not in Park, in reverse and up to about 30 km/h, and the EU has demanded such a system for new types since July 2019. Ford calls the unit PACM; on the 2020-21 Escape Hybrid it sits in the right rear quarter (TSB 21-2271). An open line typically means a silent car, so pedestrians lose their warning and the driver usually sees a message.
Possible causes
- Broken wire or loose connector at the alert module high
- Blown fuse or interrupted supply to the module medium
- Internal fault of the pedestrian alert module low
Symptoms
- No artificial driving sound at low speed or in reverse
- Pedestrian alert warning message in the instrument cluster
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0DED
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.