OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0DEA

Hybrid/EV Battery Pack Coolant Control Valve C Stuck On

P0DEA means coolant control valve C stays in its active position even though the controller has asked it to return. A wiring check cannot see this, because the circuit is intact; the controller needs a position feedback, as on GM's Volt valve with its own sensor codes, or it infers the state from coolant and pack temperatures that keep moving the wrong way. No manufacturer documents P0DEA publicly. Mercedes battery management shows for valve A that the same mechanical fault can be named in both directions, with separate codes for a shutoff valve that will not close and one that will not open (P0CE000, P0CE100). Depending on what C controls, coolant keeps flowing through the chiller or heater path, so the pack may be overcooled in winter or kept warm in summer. Stuck off is P0DE9.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / EA

Possible causes

  • Valve jammed in the active position by debris or wear high
  • Driver stage that does not switch off medium
  • Software misreading the temperature response low

Symptoms

  • Pack too cold in winter or too warm in summer
  • Reduced range or charging speed
  • Malfunction indicator lamp on

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0DEA

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication