OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0DE8

Hybrid/EV Battery Pack Coolant Control Valve C Control Circuit/Open

P0DE8 reports an open or otherwise faulty drive circuit for coolant control valve C, a third switchable valve in the coolant loop of the hybrid or EV battery. What it switches depends on the layout, for example whether coolant passes through the radiator, the air-conditioning chiller or a heater, and the maker decides which valve is called C. No manufacturer documents P0DE8 publicly. The closest documented case is valve A: the battery management of Mercedes S-, E- and C-Class hybrids flags its actuation as electrically faulty or open with P0CDF00 (LI83.30-P-061224). CARB demands circuit checks on every output used to heat or cool the energy store. Expect a broken wire, a loose plug or an open coil. Shorts are P0DEB and P0DEC, an overloaded driver P0E22.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / E8

Possible causes

  • Broken wire or loose connector at valve C high
  • Open coil or motor winding inside valve C medium
  • Corroded pins from coolant or water ingress medium
  • Failed driver stage in the controlling module low

Symptoms

  • Battery temperature control works only in a fallback mode
  • Charging or drive power reduced when the pack is too hot or cold
  • Malfunction indicator lamp on

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0DE8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication