P0DE7
Hybrid/EV Battery Pack Cell Voltage High
P0DE7 is stored when a single cell of the high-voltage pack climbs above the upper voltage limit the battery controller permits. Overcharged lithium-ion cells age quickly and can become unsafe, so the controller usually restricts charging and regenerative braking until the cell is back in range. The only public manufacturer use found is Ram: bulletin 08-030-24 and its sister bulletins for the 2019-2024 Ram 1500 with eTorque mild hybrid (3.6 L V6 and 5.7 L V8) list P0DE7 together with cell supervisory, voltage sense and balancing codes and prescribe new BPCM software, pointing to a calibration cause. Other plausible causes are failed balancing, a cell with raised internal resistance during regen, or a drifting measurement chip. Low cell voltage is P0DE6, pack overvoltage P0AFB.
Possible causes
- Battery controller software or calibration (documented by Ram) high
- Cell balancing no longer bleeding off the highest cell medium
- Aged cell with raised internal resistance overshooting during regen medium
- Drifting cell monitoring chip reporting too high a value low
Symptoms
- Malfunction indicator lamp on
- Weaker regenerative braking, charging limited
- Mild-hybrid assist or start-stop unavailable
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0DE7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.