OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0DE6

Hybrid/EV Battery Pack Cell Voltage Low

P0DE6 means the battery controller has measured at least one cell of the high-voltage pack below its lower voltage limit. It concerns a real reading, not the sensing lines (P0B3D and similar), and it looks at the weakest cell rather than the charge of the whole pack (P0A7D). Ford pairs it with P0A7D on 2020 Escape and Explorer hybrids drained by long standing or failed starts; a rescue charge needs the lowest cell above 1.45 V and a cell spread under 2.5 V (SSM 49163, later 51460, 52230 and 52773 for 2023-24 models). Stellantis fixes P0DE6 with BPCM software on the 2024-25 Dodge Charger EV and Jeep Wagoneer S, and on the 2026 Cherokee hybrid lengthened its maturing time for cold cranks. A no-start or reduced power is typical.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / E6

Possible causes

  • Pack deeply discharged after long standing or repeated failed starts high
  • Battery controller software judging too strictly (e.g. cold cranking) medium
  • Single weak cell with high self-discharge or lost capacity medium
  • Cell balancing circuit draining one cell low

Symptoms

  • Vehicle will not start or switch to ready
  • Reduced power, no electric driving
  • Malfunction indicator lamp on

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0DE6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication