OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0DE5

Charge Status Indicator B Control Circuit/Open

P0DE5 flags an interrupted drive circuit for charge status indicator B, a second lamp or LED that tells the owner whether the vehicle is charging, for instance one at the charge port next to the one on the dashboard. Which light gets the letter B is up to the maker. No manufacturer documents P0DE5 publicly. GM's tables for the Chevrolet Volt and Cadillac ELR only cover indicator A (P0D2C): the hybrid controller samples the LED driver every 100 ms, needs 40 bad results out of 50 and checks for a short to battery or an open line while the LED is commanded off. In the current code set, shorts on B have their own codes, P0E41 and P0E42, so P0DE5 narrows the fault to a break: a cut wire, a loose connector or a dead LED. Charging itself still works.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / E5

Possible causes

  • Broken wire or unplugged connector to indicator B high
  • Burnt-out LED or failed indicator unit medium
  • Corroded contacts in the weather-exposed charge port area medium
  • Failed output driver in the controlling module low

Symptoms

  • Charge status indicator B stays dark while charging
  • Charging works normally
  • Warning lamp possible depending on the manufacturer

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0DE5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication