OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0DE4

Electric/Auxiliary Transmission Fluid Pump A Motor Over Temperature

P0DE4 reports that the electric motor of auxiliary transmission fluid pump A has run too hot. Such a pump keeps the transmission pressurised while the engine is stopped, either by start-stop or during electric driving in a hybrid. No manufacturer documents P0DE4 publicly. Ford's 2019 hybrid OBD summary shows how its plug-in hybrids treat pump heat under other codes: once the pump circuit board exceeds 130 °C for 3 s the TCM logs P175A and disables the pump, and above 135 °C the event feeds the stall code P0C2A. Heat builds when the motor labours against low, aged or very cold fluid, against a binding rotor, or in a hot transmission. The car then usually keeps the engine running instead of stopping or driving electrically. P0C1B is the controller electronics, P277D the motor of pump B.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / E4

Possible causes

  • Low, aged or wrong transmission fluid making the pump work harder high
  • Binding rotor or worn bearing in the pump motor medium
  • Transmission running hot (towing, heat, restricted fluid cooler) medium
  • Faulty temperature evaluation in the pump controller or outdated software low

Symptoms

  • Start-stop no longer shuts the engine off
  • Electric driving limited, engine keeps running
  • Harsh engagement when pulling away after a stop
  • Malfunction indicator lamp on

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0DE4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication