OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0DE0

Hybrid/EV Battery Cell Balancing Circuit N

P0DE0 flags a wiring or driver fault in balancing circuit N, the fourteenth and last letter of the series; the next code, P0DE4, belongs to a different system. Packs with more balancing groups than fourteen must therefore map several groups to one letter or use their own codes. Ford's hybrid BECM is one of the few documented users that fills all fourteen letters, but only with stuck codes, so P0DE0 itself has no public maker source. How a broken balancing terminal is found is shown in Toshiba patent US20130026994A1, where comparing the sense pin with the balancing pin reveals an open connection. CARB 13 CCR 1968.2 requires codes that point to the smallest replaceable unit. Stuck and plausibility faults of N: P0DE1 to P0DE3.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / E0

Possible causes

  • Open balancing terminal or lead of group N high
  • Corroded or loose connector at the last module board medium
  • Monitoring chip channel for N defective low

Symptoms

  • Hybrid battery warning with check engine light
  • Electric operation or charging restricted

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0DE0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication