P0DDC
Hybrid/EV Battery Cell Balancing Circuit M
P0DDC reports an electrical fault of balancing circuit M, the thirteenth group, which only large packs with at least thirteen channels possess. No maker publishes this exact code; in Ford's BECM documents M appears only as stuck on (P0DDD) and stuck off (P0DDE). LaunchPoint's patent US8598840B2 describes how such faults can be found while the system runs: built-in tests feed every cell measurement its own distinct test signal and are run from a circuit domain kept separate from the balancing and measuring electronics they check, so one failure cannot hide itself. Wiring breaks, damaged connectors and chip faults are typical findings. CARB 13 CCR 1968.2 requires these parts to be watched on hybrids. Related: P0DDD to P0DDF.
Possible causes
- Broken sense or balancing wire of group M high
- Damaged or poorly seated connector at the board for M medium
- Fault in the monitoring electronics of channel M low
Symptoms
- Check engine light and hybrid warning
- Battery controller restricting power or charging
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0DDC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.