OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0DDB

Hybrid/EV Battery Cell Balancing Circuit L Range/Performance

P0DDB stands for balancing of group L whose result is out of range although the circuit answers. No maker documents P0DDB publicly. A patent by Southwest Electronic Energy, US9097774B2, adds an important angle: it counts how often each cell has to be balanced and flags a cell that needs it far more or less often than the others, since an internal short can be the reason. Applied here, a plausibility fault of L may not be a balancing defect at all but a cell that keeps losing charge. That makes a careful look at self-discharge and cell voltages worthwhile before parts are replaced. CARB requires hybrids to flag a balancing system that fails to keep cells at their target voltage. Electrical fault of L: P0DD8.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / DB

Possible causes

  • Cell in group L with an internal soft short, needing balancing again and again medium
  • Controller calibration of expected balancing effect for L medium
  • Drifted bleed resistor of circuit L low

Symptoms

  • Check engine light, sometimes only after long parking
  • Group L drifting low between charges
  • Range estimate varying from day to day

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0DDB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication