P0DD8
Hybrid/EV Battery Cell Balancing Circuit L
P0DD8 concerns the hardware of balancing circuit L, the twelfth group. No manufacturer documents it publicly; Ford, whose hybrid BECM runs through letter N, uses L only in the stuck codes P0DD9 and P0DDA. LG Chem's patent EP2730933A1 shows a way to test one balancing circuit through its neighbour: diagnosis resistors sit between each balancing circuit and its cell terminals, and when the circuit under test is switched on or off, the voltage measured across the adjacent circuit has to change in a known pattern. A missing or wrong pattern exposes a broken resistor, switch or connection. The CARB regulation requires separate codes that lead the technician to the replaceable unit. Stuck and plausibility faults of L: P0DD9 to P0DDB.
Possible causes
- Open resistor, switch or solder joint in circuit L high
- Poor connection of the cell taps of group L medium
- Faulty voltage measuring channel next to circuit L low
Symptoms
- Hybrid battery warning and check engine light
- Power or charging limited
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0DD8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.